Polybutene-1 grades marketed for pipe production in Europe conform to all existing national standards. Withdrawn and replaced by ISO All materials used as components of Polybutene-1 piping systems when in permanent or temporary contact with water intended for human consumption must not adversely affect the quality of the drinking water in accordance with the applicable EC Directives and EFTA Regulations on the quality of drinking water. It is applicable to the system of pipes, fittings and connected appliances installed for supplying drinking water. Until requirements and methods are accepted on an international level for all piping systems and associated components, all applicable national regulations and statutory building codes relating to PB-1 piping systems for each country and project location must be observed. Influence of organic materials on water intended for human consumption — Determination of odour and flavour of water in piping systems - Test method Draft under evaluation. Polybutene-1 piping systems are designed to meet stringent organoleptic and food contact approvals and are well suited for drinking water applications. 
| Uploader: | Dibar |
| Date Added: | 7 July 2014 |
| File Size: | 22.88 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 83469 |
| Price: | Free* [*Free Regsitration Required] |
Potable Water Standards | PB-1 Piping Systems
Withdrawn and replaced by ISO Product standards accreditation and suitability of purpose It is the responsibility of every manufacturer to ensure that the products they sell are 8806-5 for their intended purpose. This document can also be used for heating installations if applicable, except for under floor heating for which EN can apply.
Polybutene-1 is not sold by PBPSA members for use in pipe applications intended for use in North Ddin, and those parties require their customers or distributors not to sell products made from PB-1 into pipe applications for North America. Product compliance to the relevant National and International standards provides the purchaser and consumer with an assurance that the product will prove to be suitable for its intended purpose.
Potable Water Standards | PB-1 Piping Systems
Operation and maintenance This European standard specifies requirements for and gives recommendations on the design, installation, alteration, testing, maintenance and operation of drinking water installations within buildings and for certain purposes pipework wn buildings but within the premises. PB-1 piping systems are free of any water contamination at the tap due to corrosion.
Components made from Polybutene-1 intended for use in the conveyance of water for human consumption fulfil all existing requirements of national and international applicable standards in Europe. Influence of organic materials on water intended for human consumption — Determination of ne and flavour of water in piping systems - Test method Draft under evaluation. This standard is applicable to products intended to be used under various conditions for the transport and storage of water 806-55 for human consumption, including raw water used for the production of water intended for human consumption.
Standards xin to the potable water quality of PB-1 piping systems Currently, unilateral European standards are unavailable for the accreditation of potable water piping systems. Test method for water treatment membranes This European Standard specifies a procedure to determine the migration of substances from non-metallic and non-cementitious factory made or factory applied products for use in contact with water intended for human consumption.
Potable Water Standards PB-1 Piping Systems All materials used as components of Polybutene-1 piping systems when in permanent or temporary contact with water intended for human consumption must not adversely affect the quality of the drinking water in accordance with the applicable EC Directives and EFTA Regulations on the quality of drinking water.
Evaluation of the data is described in ENV It is the responsibility of every manufacturer to ensure that the products they sell are fit xin their intended purpose.
Organoleptic and food contact approvals Polybutene-1 piping systems are designed to meet stringent organoleptic and food contact approvals and are well suited for drinking water applications. The accreditation bodies responsible for drinking water quality in each of the member states are contracted to undertake the necessary development work in four co-operative working groups.
All materials used as components of Polybutene-1 piping systems when in permanent or temporary contact with water intended for human consumption must not adversely affect the quality of the drinking water in accordance with the applicable EC Directives and EFTA Regulations on the quality of drinking water. Plastics piping systems — Plastics pipes and fittings - Determination of opacity Of importance when algae growth must be considered.
It gives guidance on: The Standards listings provided on the Standards pages of the PBPSA website and downloadable PDF file are for information only and although updated periodically, are not guaranteed to be exhaustive. Guidance is also given on acceptable methods of jointing polybutene PBcrosslinked polyethylene PE-Xpolypropylene PPchlorinated poly vinyl chloride PVC-C and Polyethylene of raised temperature resistance PE-RT pipes and associated fittings, together with recommendations for their storage, handling and transportation.
Plastics pipes and fittings — Determination of opacity The test method is necessary for a pipe or fitting used for water supply which is exposed to visible light during service to be sufficiently opaque to prevent algae growth. Questions relating to accreditations for particular products should therefore be addressed to the specific manufacturer. PB-1 grades for potable water systems, comply with strict regulatory and certification requirements.
The latest generation PB-1 grades deliver improved water quality properties providing the potential to meet future stringent organoleptic requirements. Plastic piping systems for the transport of water intended for human consumption — Migration assessment - Guidance on the interpretation of laboratory derived migration values This Technical Report is applicable to plastics pipes, joints and fittings to be used for the transport of water intended for human consumption and raw water used for the manufacture of water intended for human consumption.
It is applicable to the system of pipes, fittings and connected appliances installed for supplying drinking water. The standardisation procedures associated with the performance of hot and cold water pressure pipes are extensive and demanding. Until the scheme comes into force, national accreditation procedures for potable water systems will still apply.
It covers the extraction by water of substances from the finished products. Therefore, the responsibility to determine the standards to which a manufactured product must comply and obtaining approvals for those products and assembled systems from National and International hygiene and water quality authorities lies with the manufacturers of such products.
KEMPER PROTECT Backflow preventer BA
Until requirements and methods are accepted on an international level for all piping systems and associated components, all applicable national regulations and statutory building codes relating to PB-1 piping systems sin each country and project location must be observed. Home Standards Potable Water. Plastic piping systems for the transport of water intended for human consumption — Migration assessment Determination of migration values of plastics pipes and fittings and their joints.
No comments:
Post a Comment